Best Level 2 Chimney Inspection Near You in Sacramento

Quick Answer: What Is a Level 2 Chimney Inspection?

A Level 2 chimney inspection includes everything in a Level 1 inspection plus a video camera scan of the interior of the flue. The technician also inspects accessible attic spaces, crawl spaces, and basements around the chimney. The video camera reveals cracks, gaps, creosote buildup, and structural issues that aren’t visible during a standard visual inspection. It’s required when buying or selling a home, after a chimney fire, when changing fuel types, or after seismic activity.

When You Actually Need a Level 2 Inspection

The NFPA 211 standard defines specific situations where a Level 2 inspection is the appropriate level of examination. These aren’t recommendations – they’re industry standards backed by fire safety research.

When buying or selling a home. Any time a property changes hands, the NFPA recommends a Level 2 inspection. The buyer needs to know the chimney’s true condition before closing. The seller benefits from documented proof of the chimney’s state at the time of sale. In our experience across Sacramento and the surrounding counties, about 1 in 3 home sale inspections reveals a condition that needs attention.

After a chimney fire. Chimney fires reach temperatures above 2000°F. That heat cracks clay tiles, warps stainless steel liners, and destroys mortar joints. The damage is almost always internal. A visual inspection from above or below won’t show you the full picture. The video camera scan does.

After an earthquake or severe storm. Seismic activity shifts masonry. Wind and falling trees impact the chimney structure. These events cause cracks that may not be visible from outside. Sacramento sits in an active seismic zone, and we’ve inspected dozens of chimneys after tremors. The video camera reveals what shifted internally.

When changing fuel types. Switching from wood to gas, or from oil to gas, changes the combustion characteristics and byproducts your chimney handles. The NFPA requires verification that your existing chimney can safely accommodate the new fuel. That verification comes from a Level 2 inspection.

When a Level 1 inspection raises concerns. Sometimes a standard visual inspection reveals something that needs a closer look – a strange odor, a stain on the exterior masonry, or an unusual sound when the damper moves. Upgrading to a Level 2 provides the detail needed to diagnose the issue accurately.

Not sure which level you need? Call (916) 833-2959 and describe your situation. We’ll give you a straight answer in under 2 minutes.

Top-Rated Level 2 Chimney Inspection in Sacramento: How the Video Camera Scan Works

The video camera scan is what separates a Level 2 inspection from a Level 1. Here’s exactly how it works.

The technician uses a professional chimney inspection camera – not a plumbing camera or a DIY endoscope. These cameras are built for the soot, heat, and tight spaces inside a flue. The camera head is small, typically under 2 inches in diameter, and mounted on a flexible rod that can navigate bends and offsets.

The camera connects to a monitor via a cable. The monitor displays a live video feed as the camera moves through the flue. High-end systems provide high-definition images with adjustable lighting, allowing the technician to see fine cracks and subtle deterioration.

Here’s the step-by-step process.

The technician begins by completing a standard Level 1 visual inspection. They examine the firebox, damper, smoke chamber, and all visible exterior components. This establishes a baseline before the camera goes in.

Next, they set up the video equipment. The camera is inserted into the flue, usually from the top of the chimney through the flue opening. In some cases, it’s inserted from below through the firebox. The choice depends on the chimney’s design and where the technician needs the best viewing angle.

As the camera moves through the flue, the technician examines every inch of the liner’s interior surface. They look for cracks in clay tiles, gaps between liner sections, areas where the liner has separated from the chimney walls, creosote deposits (especially the hard, glazed stage-3 creosote that’s difficult to remove), obstructions like animal nests or fallen debris, and signs of previous chimney fire damage.

The flexible rod allows the camera to navigate offsets – bends or angles in the flue that accommodate the chimney’s path through the house. The entire interior surface gets examined, from the top of the flue down to the smoke shelf.

When the technician spots something worth documenting, they pause the camera, zoom in if needed, and capture a still image or video clip. These images become part of your inspection record. If you’re selling a home, these images provide documented proof of the chimney’s condition for the buyer.

After the flue scan, the technician inspects accessible areas around the chimney. They check the attic where the chimney passes through the roof structure, looking for proper clearances between the chimney and wood framing. They examine the crawl space or basement where the chimney begins. They verify that insulation, drywall, and other combustible materials maintain the required 2-inch clearance from the chimney’s exterior.

The entire process typically takes 90 to 120 minutes, depending on the flue’s length, the number of offsets, and the accessibility of surrounding spaces.

In many cases, homeowners are invited to watch the live camera feed. It’s a surprisingly effective way to understand exactly what’s happening inside your chimney. Seeing a crack in real-time makes the recommendation for repair immediately clear.

But here’s where it gets interesting.

The video scan doesn’t just find major problems. It also catches early-stage deterioration – small cracks that haven’t yet compromised safety but will grow over the next few years. Identifying these issues early gives you time to plan and budget for repairs before they become emergencies.

What a Level 2 Inspection Finds That a Level 1 Cannot

A Level 1 inspection relies on visual examination of readily accessible areas. The technician looks down into the flue from the top and up from the firebox. They can see the first few feet of the liner, but the middle section – often 15 to 30 feet of flue – remains invisible.

That’s where problems hide.

Interior flue liner cracks are the most common finding. Clay tiles crack due to thermal shock (rapid heating and cooling), moisture penetration and freeze-thaw cycles, settling of the chimney structure, and damage from chimney fires. These cracks are often horizontal and located in the middle third of the flue where thermal stress is highest. A visual inspection from above or below won’t reveal them. The camera does.

Gaps between liner sections occur when mortar joints deteriorate or when tiles shift slightly. A 1/8-inch gap may seem minor, but it allows heat and gases to escape into the chimney structure. Over years, that heat degrades the masonry and can reach combustible materials. The video camera reveals these gaps clearly.

Hidden creosote deposits accumulate in areas with poor draft or where the flue changes direction. Stage-3 creosote – the hard, shiny, tar-like coating – is particularly dangerous because it’s highly flammable and difficult to remove. It often builds up behind offsets or in the upper third of the flue. The camera scan shows exactly where it is and how much has accumulated.

Deterioration behind the smoke chamber is another invisible problem. The smoke chamber sits above the damper and compresses gases before they enter the flue. Cracks or gaps in the smoke chamber allow heat to reach wood framing and can cause smoke to enter living spaces. The camera reveals this deterioration from angles that aren’t visible during a standard inspection.

Blockages deep within the flue – collapsed sections of liner, fallen chimney cap components, large accumulations of leaves or animal nesting material – are impossible to diagnose accurately without a camera. You might suspect a blockage based on poor draft or smoke spillage, but the camera shows you exactly what’s blocking the flue and where.

Structural damage from chimney fires often appears in the middle sections of the flue. The intense heat cracks tiles, warps metal liners, and destroys mortar. This damage may not be visible from the top or bottom, especially if there’s a layer of soot covering the surface. The camera scan reveals the true extent of fire damage.

Clearance violations in attic and crawl spaces are the final piece. The NFPA requires a 2-inch clearance between the chimney’s exterior and any combustible material. Over the years, homeowners sometimes add insulation, run wiring, or install storage platforms that encroach on this clearance. A Level 2 inspection checks these spaces and documents violations that create fire risk.

So what does that mean for you?

A Level 1 inspection is appropriate for an annual checkup when nothing has changed. A Level 2 inspection is appropriate when you need to know the full truth about your chimney’s internal condition. The video camera eliminates guesswork.

Best Level 2 Chimney Inspection for Home Sales in Sacramento

If you’re buying or selling a home in Sacramento, Grass Valley, Auburn, Placerville, or the surrounding area, a Level 2 chimney inspection is one of the smartest investments you can make.

For buyers, it reveals the chimney’s true condition before you commit to the purchase. A general home inspection typically includes only a basic visual look at the chimney – equivalent to a Level 1. The home inspector may recommend a dedicated chimney inspection, especially if the house has a wood-burning fireplace or if the chimney shows signs of age or previous repairs.

The video camera scan shows you exactly what you’re buying. If the flue liner is cracked, you know it before closing. If creosote buildup is significant, you can negotiate for a cleaning or a price adjustment. If the chimney is in excellent condition, you have documented proof that one of the home’s major systems is sound.

For sellers, a Level 2 inspection completed before listing provides transparency and can speed the sale process. When a buyer’s inspector recommends a chimney inspection, you already have recent results to share. If issues exist, you have the option to address them proactively or price the home accordingly. Either way, you’re negotiating from a position of knowledge rather than surprise.

Real estate agents across Nevada County and Placer County increasingly recommend Level 2 inspections as standard practice for homes with chimneys. The documentation protects everyone involved.

Americas Chimney Sweep Company understands that real estate timelines matter. When you call, let us know your closing date or inspection deadline. We’ll work with your schedule to deliver results when you need them. Our average response time is 16 minutes, and we maintain a 100% response rate.

Working on a home sale? Call (916) 833-2959 and mention your timeline. We’ll prioritize your inspection.

Quick Answer: How Much Does a Level 2 Chimney Inspection Cost?

The cost of a Level 2 chimney inspection varies by several factors. Chimney height affects the time required and the length of camera rod needed. A single-story ranch chimney takes less time than a two-story chimney with 30 feet of flue. Chimney type matters – masonry chimneys with clay tile liners require different techniques than factory-built metal chimneys. Accessibility plays a role. If the attic or crawl space is difficult to access, the inspection takes longer. The extent of issues found can extend the inspection time if extensive documentation is needed.

A Level 2 inspection costs more than a Level 1 because of the specialized equipment required and the additional time involved. The video camera system, monitor, and flexible rods represent a significant investment in professional-grade tools.

For current pricing in the Sacramento area, call Americas Chimney Sweep Company at (916) 833-2959. We’ll ask a few questions about your chimney and give you an accurate quote.

Top-Rated Chimney Inspection Service Near You: What Our Customers Say

Americas Chimney Sweep Company has a 5.0-star rating on Yelp from top reviews. Here’s what homeowners in Sacramento and the surrounding area say about our service.

“The owner was incredibly prompt, professional, and highly communicative,” says Brian C. That responsiveness matters when you’re working with a real estate deadline or need to know if your chimney is safe to use after an event.

Nimi T. appreciated the practical advice: “Best tips on getting a fire started safely.” A good inspection doesn’t just identify problems – it also helps you use your fireplace system correctly.

Sunny M. highlighted the inspection process itself: “Very thorough service… consultative while not being salesey.” That’s the approach we take on every Level 2 inspection. We present the facts, explain what we found, and let you make informed decisions.

Andrew M. summed it up: “Timely, efficient, knowledgeable, and reasonably priced.” Those are the qualities that matter when you’re trusting someone with your home’s safety.

Our average response time is 16 minutes, and we serve an 80-mile radius around Sacramento. That includes Nevada County, Placer County, El Dorado County, Sacramento County, and Yolo County. We’re open Monday through Friday and Sunday, 7:00 AM to 7:00 PM.

Level 1 vs. Level 2 vs. Level 3: Understanding the Three Inspection Levels

The NFPA 211 standard defines three levels of chimney inspection. Each serves a different purpose.

Level 1 is a visual inspection of readily accessible areas. The technician examines the firebox, damper, smoke chamber (from below), the visible portions of the flue liner from above and below, the chimney cap, crown, and flashing. It’s the standard annual checkup for chimneys operating under unchanged conditions. If you’ve been using the same fireplace the same way for years and haven’t had any events like fires or earthquakes, a Level 1 is typically sufficient.

Level 2 includes everything in Level 1 plus a video camera scan of the flue interior and inspection of accessible attic, crawl space, and basement areas around the chimney. It does not involve removing any permanent parts of the home or chimney. It’s required when a home is sold, a fuel type changes, after a chimney fire, after seismic activity or severe weather, or when a Level 1 inspection reveals concerns.

Level 3 is the most invasive. It may involve removing sections of the chimney, opening walls, or accessing concealed areas through destructive means. This level is only used when a serious hidden hazard is strongly suspected and cannot be evaluated through Level 1 or Level 2 methods. For example, if the video camera scan reveals what appears to be a major structural failure but the full extent can’t be determined, a Level 3 might be necessary.

For the vast majority of homeowners, a combination of annual Level 1 inspections and a Level 2 whenever triggering events occur provides complete coverage.

Here’s the bottom line.

If your chimney’s use and condition haven’t changed, stick with Level 1. If you’re buying, selling, changing fuels, or recovering from an event, upgrade to Level 2. If a Level 2 finds something that requires opening walls or removing components to fully assess, then consider Level 3.

What Should You Do? Common Level 2 Inspection Scenarios

If you’re selling your home and the buyer’s inspector recommended a Level 2 chimney inspection, here’s what that usually means: The inspector saw something during the general home inspection that raised a question – an older chimney, signs of previous repairs, staining on the exterior masonry, or simply the fact that the home has a fireplace. The recommendation is standard practice for thorough home inspectors. Your best next step: Schedule the Level 2 inspection promptly so results are available before the inspection contingency deadline. If issues are found, you’ll have time to get repair quotes and negotiate.

If you had a chimney fire and you’re wondering if it’s safe to use the fireplace again, here’s what that usually means: Chimney fires create intense heat that damages flue liners. Even if the fire seemed minor or you didn’t see flames coming out of the top of the chimney, internal damage is likely. The video camera scan is the only way to assess that damage accurately. Your best next step: Don’t use the fireplace until after a Level 2 inspection. Call (916) 833-2959 to schedule. We’ll show you exactly what the fire did and what needs repair.

If you’re switching from a wood-burning fireplace to a gas insert, here’s what that usually means: Gas burns cleaner than wood but produces more moisture. The existing chimney and liner need to be in good condition and properly sized for the new appliance. The Level 2 inspection verifies compatibility and reveals any existing damage that should be repaired before the conversion. Your best next step: Schedule the inspection before you purchase the gas insert. The results will confirm whether your chimney can accommodate the new appliance or whether modifications are needed.

If you recently felt an earthquake and you’re concerned about your chimney, here’s what that usually means: Chimneys are vulnerable to seismic activity because they’re tall, heavy, and often built with rigid masonry. Even moderate tremors can crack flue liners and shift components. External cracks may or may not be present, but internal damage is common. Your best next step: A Level 2 inspection reveals hidden cracks and shifts. Even if the chimney looks fine from outside, don’t use it until after the video scan confirms the flue liner is intact.

If you bought an older home and you’re not sure about the chimney’s condition, here’s what that usually means: Older chimneys were often built before modern liner standards were established. Some have no liner at all. Others have deteriorated liners that were never repaired. If you’re planning to use the fireplace, you need to know what’s inside that chimney. Your best next step: Start with a Level 2 inspection. It gives you a complete picture of the chimney’s condition and helps you decide whether repairs, relining, or simply enjoying a decorative (non-functional) fireplace makes the most sense.

If your annual Level 1 inspection revealed something that needs a closer look, here’s what that usually means: The technician saw a potential issue – maybe an odor suggesting moisture infiltration, a slight gap visible from below, or performance problems like poor draft – that can’t be fully diagnosed without seeing inside the flue. Your best next step: Upgrade to a Level 2. The video camera will either confirm the concern and show its extent, or it will rule out serious issues and give you peace of mind.

Preparation Guide for Your Level 2 Chimney Inspection

Here’s what helps before your appointment.

Clear the area around the fireplace. Move furniture, decorations, rugs, and fireplace tools at least 3 feet away from the opening. The technician needs room to set up video equipment and access the firebox.

Remove or open fireplace screens and glass doors. If your fireplace has glass doors, open them fully or remove them if they’re designed to come off. Remove mesh screens or spark guards.

Ensure attic access is clear. The technician will need to access your attic to inspect the chimney where it passes through the roof structure. Make sure the attic hatch or door is accessible. Move boxes, storage items, or insulation that might block the path to the chimney.

Clear the crawl space entrance. If you have a crawl space, make sure the entry point is accessible and that the technician can reach the area around the chimney base.

Gather past chimney records. If you have documentation from previous inspections, cleanings, repairs, or chimney liner installations, have those available. This history helps the technician understand changes over time and identify areas that may need special attention.

Note anything unusual you’ve observed. Write down any concerns – smoke spillage into the room, unusual odors (especially a musty smell when it rains), water stains on the exterior masonry, sounds from inside the chimney like animal activity, or performance changes like reduced draft. These observations guide the inspection.

Mention the reason for the Level 2 inspection when you schedule. Whether it’s for a home sale, after a chimney fire, for a fuel conversion, or another reason, this context helps the technician focus the examination appropriately.

Plan to be home during the inspection. The technician will have questions about the chimney’s history and how you use the fireplace. Being present also allows you to see the video camera feed and ask questions in real-time.

After the service – a few things worth knowing.

The technician will review findings immediately. They’ll walk you through what the camera scan revealed, show you images or video clips of any issues, and explain what the findings mean for your chimney’s safety and function.

If the inspection was for a real estate transaction, ask about the format of the report. Some situations require a formal written summary. Others are fine with a verbal review and a few photos emailed to you.

If repairs are recommended, get specifics. Ask about the location and severity of the issue, your options for repair (there’s often more than one solution), whether the problem needs immediate attention or can be monitored, and what happens if you delay the repair.

If you’re switching fuels, ask whether the chimney can accommodate the new appliance as-is or whether modifications are needed before installation.

Don’t hesitate to ask for clarification. A good technician will take the time to make sure you understand the findings before they leave.

Glossary: A Few Terms You Might Run Into

Video camera scan: A method of inspecting the interior of a chimney flue using a small, high-resolution camera on a flexible rod. It reveals cracks, gaps, creosote buildup, and structural issues that aren’t visible during a standard visual inspection.

Flue liner: A protective layer inside the chimney flue that shields the chimney walls and your home from heat and corrosive gases. Common materials include clay tile, stainless steel, and cast-in-place cement. The liner is the most critical component for safety.

Clearance: The required distance between the chimney’s exterior and any combustible material such as wood framing, insulation, drywall, or stored items. The NFPA requires a minimum 2-inch clearance for masonry chimneys.

Chimney fire: An uncontrolled fire inside the chimney flue, usually caused by ignited creosote buildup. Chimney fires can be explosive and dramatic (loud, with flames shooting from the top) or slow-burning and barely noticeable while still causing severe damage to the flue liner.

Creosote: A flammable, tar-like substance that accumulates inside the flue when wood is burned. It appears in three stages: stage-1 (light, flaky, easy to brush away), stage-2 (granular, somewhat shiny, more difficult to remove), and stage-3 (hard, shiny, tar-like glaze that’s extremely flammable and very difficult to remove).

Smoke chamber: The area above the damper and below the flue opening. It compresses and funnels combustion gases upward into the flue. Cracks or gaps in the smoke chamber can allow heat and smoke to reach structural materials or enter living spaces.

Offset: A bend or angle in the flue path. Offsets occur when the chimney needs to navigate around structural elements like beams or to align with the roof. The video camera’s flexible rod can navigate offsets to inspect the full flue length.

Chase: The enclosure around a factory-built (prefab) chimney, usually constructed with wood framing and covered with siding or a metal chase cover. During a Level 2 inspection, the technician inspects the interior of the chase if it’s accessible.

NFPA 211: The National Fire Protection Association standard for chimneys, fireplaces, vents, and solid fuel-burning appliances. It defines the three levels of chimney inspection and specifies when each level is appropriate.

Thermal shock: Rapid temperature changes that cause expansion and contraction in chimney materials. Repeated thermal shock cycles crack clay tiles and degrade mortar joints over time.

Frequently Asked Questions About Level 2 Chimney Inspections

What is a Level 2 chimney inspection?
A Level 2 inspection includes everything in a Level 1, plus a video camera scan of the flue interior. The technician also inspects accessible attic, crawl space, and basement areas around the chimney. It provides a thorough assessment of both the chimney system and the surrounding structure.

When is a Level 2 inspection required?
It’s required when buying or selling a home, after a chimney fire, after an earthquake or severe weather event, when switching fuel types (like wood to gas), or when a Level 1 inspection reveals concerns that need closer examination.

How does the video camera scan work?
A small, high-resolution camera on a flexible rod is inserted into the flue. It sends a live video feed to a monitor, allowing the technician to examine every inch of the liner’s interior surface. This reveals cracks, gaps, creosote buildup, and damage that aren’t visible during a visual-only inspection.

How long does a Level 2 inspection take?
It typically takes 90 to 120 minutes. The video scan, plus inspection of surrounding spaces, adds time compared to a Level 1. The exact duration depends on your chimney’s height, complexity, and condition.

How much does it cost in Sacramento?
The cost varies by chimney type, height, accessibility, and the extent of the inspection. A Level 2 costs more than a Level 1 due to specialized equipment and additional time. Call (916) 833-2959 for current pricing.

Do I need one to sell my home?
The NFPA recommends a Level 2 inspection any time a property changes hands. Many real estate professionals and home inspectors in the Sacramento area specifically request it. It protects both buyer and seller by documenting the chimney’s condition.

What can a Level 2 find that a Level 1 can’t?
The video scan reveals interior flue liner cracks, gaps between liner sections, hidden creosote deposits (especially stage-3 glazed creosote), deterioration behind the smoke chamber, deep blockages, structural damage from chimney fires, and clearance violations in attic or crawl spaces.

What’s the difference between Level 2 and Level 3?
A Level 2 uses a camera but doesn’t involve removing any building components. A Level 3 may require opening walls or removing chimney parts to access concealed areas. Level 3 is only used when a serious hidden hazard is suspected and can’t be evaluated through Level 2 methods.

Will I get a written report?
The technician will review findings with you immediately after the inspection. If you need a formal written or digital report for a real estate transaction, insurance claim, or personal records, let us know when scheduling.

Can it be done on any chimney type?
Level 2 inspections work on masonry chimneys, factory-built (prefab) chimneys, and metal flue systems. The video camera equipment is flexible enough to navigate different flue shapes, sizes, and offsets.

Do I need one after a chimney fire?
A Level 2 inspection is strongly recommended after any chimney fire. The intense heat can crack clay tiles, warp metal liners, and damage mortar joints in ways that aren’t visible from outside. The video scan shows the extent of internal damage and whether repairs are needed before you can safely use the chimney again.

What if I’m switching from wood to gas?
A Level 2 inspection is recommended when changing fuel types. Different fuels have different combustion characteristics and produce different byproducts. The inspection confirms your chimney can safely handle the new fuel and its specific requirements.

Can I watch the camera feed?
In most cases, yes. Many technicians welcome homeowners to watch the live video during the scan. It helps you see exactly what the technician sees and makes it easier to understand the findings and any recommendations.

Is one required after an earthquake?
A Level 2 inspection is recommended after any seismic event. Earthquakes can cause hidden cracks and shifts in the chimney structure and flue liner that may not be visible from outside. The video scan is the most reliable way to assess internal damage.

How do I prepare?
Clear the fireplace area, open or remove screens and doors, ensure attic and crawl space access, and have any past chimney records available. Note any concerns you’ve observed, and let us know your reason for the inspection when you schedule.

What areas do you serve?
Americas Chimney Sweep Company serves an 80-mile radius around Sacramento, CA. That covers Nevada County, Placer County, El Dorado County, Sacramento County, and Yolo County. We’re based at 10966 Morning Star Ln, Nevada City, CA 95959.

What’s the best Level 2 inspection company in Sacramento?
Look for professional video camera equipment, documented experience with Level 2 inspections, clear reporting, and honest recommendations. Americas Chimney Sweep Company has a 5.0-star rating on Yelp from top reviews and a 16-minute average response time.

Should I worry if the inspection finds a crack?
Finding a crack during an inspection is actually good news – you caught it before it caused bigger problems. Not all cracks require immediate action. The technician will explain the location, size, and severity, and whether it needs repair now or can be monitored over time.

How often should I get a Level 2 inspection?
You need a Level 2 inspection whenever specific triggering events occur – home sale, fuel change, chimney fire, earthquake, or severe weather. For routine annual inspections, a Level 1 is typically sufficient unless your chimney’s condition or use has changed.

Can I use my fireplace right after the inspection?
If the inspection finds no issues, you can use your fireplace immediately. If problems are discovered, the technician will advise whether it’s safe to use while you arrange repairs or whether the chimney should remain out of service until repairs are complete.

Schedule Your Level 2 Chimney Inspection in Sacramento

A Level 2 chimney inspection gives you the information you need to make confident decisions. Whether you’re buying a home, selling a home, recovering from a chimney fire, or preparing for a fuel conversion, the video camera scan reveals the full truth about your chimney’s internal condition.

The inspection takes 90 to 120 minutes. You get a complete picture of the flue liner, the surrounding structure, and any issues that need attention. If repairs are needed, you’ll know exactly what’s required. If the chimney is in excellent condition, you’ll have documented proof.

Americas Chimney Sweep Company has served homeowners across Nevada County and the surrounding area with a 5.0-star rating and a 16-minute average response time. We’re based at 10966 Morning Star Ln, Nevada City, CA 95959, and we serve an 80-mile radius. We’re open Monday through Friday and Sunday, 7:00 AM to 7:00 PM.

Questions about the process? Want to schedule an inspection? Call (916) 833-2959. We’ll give you straight answers and work with your timeline.